Today, enterprises such as GEs Energy Consulting are relying heavily on technology advancements to be able to serve a diverse requirements or customers base with a robust domestic presence. Big Market Research weighs up on the different forces driving the present and future performance of the market. The market status of across different regions is also evaluated in these reports. Critical business factors such as market size and share, capability, product value, technology advancements, manufacturing technology, segmentation among others form an important part of the report.
No of Reports 29511
Summary The Membrane Electrode Assembly (MEA) is the core component of a fuel cell that helps produce the electrochemical reaction needed to separate electrons. On the anode side of the MEA, a fuel (hydrogen, methanol etc.) diffuses through the membrane and is met on the cathode end by an oxidant (oxygen or air) which bonds with the fuel and receives the electrons that were separated from the fuel...
Summary Fittings for Gas & Water Transmission Systems is a system which including gas transmission system fittings and water transmission system fittings. Gas and water transmission systems are associated with different components including piping accessories, valves and flow measuring instruments and other components, which is a very large and complex parts system. The global Fittings for Gas & W...
Summary External fixation systems use a stabilizing metal frame with bars connected to pins that are drilled into bones above and below the fracture site. The system allows the surgeon to reposition the bone fragments over time to help them heal properly. External fixation systems are typically used in conjunction with internal fixation or other types of treatment, and are not usually a solution t...
Summary Building integrated photovoltaics (BIPV) are photovoltaic materials that are used to replace conventional building materials in parts of the building envelope such as the roof, skylights, or facades. They are increasingly being incorporated into the construction of new buildings as a principal or ancillary source of electrical power, although existing buildings may be retrofitted with simi...
Summary A biomass-fired power plant produces electricity and heat by burning biomass in a boiler. The most common types of boilers are hot water boilers and steam boilers. Wood chips, residues and other types of biomass are used in the boilers, in the same way as coal, natural gas and oil. The global Biomassfired Heating Plant market will reach xxx Million USD in 2017 with CAGR xx% 2018-2025. The ...
The direct methanol fuel cell (DMFC) is a relatively recent addition to the suite of fuel cell technologies; it was invented and developed in the 1990s by researchers at several institutions in the United States, including NASA and the Jet Propulsion Laboratory. During decades of research, especially around 2010, many high tech companies like NEC, UltraCell they all have dedicated a large mass of ...
Summary Wind turbine blade is mounted on the wind turbine. Most wind turbines have three blades, though there are some with two blades. Blades are generally 30 to 50 meters (100 to 165 feet) long, with the most common sizes around 40 meters (130 feet). Longer blades are being designed and tested. Blade weights vary, depending on the design and materials—a 40 meter LM Glasfiber blade for a 1.5 MW...
Summary A lithium-ion battery or Li-ion battery is a type of rechargeable battery in which lithium ions move from the negative electrode to the positive electrode during discharge and back when charging. Li-ion batteries use an intercalated lithium compound as one electrode material, compared to the metallic lithium used in a non-rechargeable lithium battery. The electrolyte, which allows for ioni...
Summary DC Contactors are designed to control the line isolation, starting, stopping, reversing, and regulating functions of a DC motor. DC Contactors are comprised of a high current switch and a solenoid in a single enclosure. The switch provides the desired function, to turn current flow on and off. The global DC Contactor market will reach xxx Million USD in 2017 with CAGR xx% 2018-2023. The ob...
Summary The direct methanol fuel cell (DMFC) is a relatively recent addition to the suite of fuel cell technologies; it was invented and developed in the 1990s by researchers at several institutions in the United States, including NASA and the Jet Propulsion Laboratory. During decades of research, especially around 2010, many high tech companies like NEC, UltraCell they all have dedicated a large ...
Summary In electrical engineering, an electrical switch is an electrical component that can "make" or "break" an electrical circuit, interrupting the current or diverting it from one conductor to another. The mechanism of a switch removes or restores the conducting path in a circuit when it is operated. It may be operated manually, for example, a light switch. The global Electrical Switches market...
Summary Lead Carbon Battery is the Ultra Battery, which is a hybrid device that combines ultra-capacitor technology with lead-acid battery technology in a single cell with a common electrolyte.Lead Carbon battery add carbon material with high capacitance or highly conductive into the negative electrode, combine the advantages of lead acid battery and super capacitors, Lead carbon battery provide n...
Summary PV Solar charge controllers, also known as PV solar charge regulators, are used in solar energy systems to protect the battery from being overcharged and over-discharged. The main types of solar charge controllers in this report covered MPPT and PWM. The global PV Solar Energy Charge Controller market will reach xxx Million USD in 2017 with CAGR xx% 2018-2023. The objective of report is to...
Summary WTE (Waste-to-Energy) or energy-from-waste (EfW) is the process of generating energy in the form of electricity and/or heat from the primary treatment of waste. WTE is a form of energy recovery. Most WTE processes produce electricity and/or heat directly through combustion, or produce a combustible fuel commodity, such as methane, methanol, ethanol or synthetic fuels. Market Segment as fol...
Summary Solar PV is one kind of device made from crystalline silicon or thin film which converts solar energy into electricity by a process known as the photovoltaic effect. The key indicator for solar PV is conversion efficiency Market Segment as follows: By Region Asia-Pacific North America Europe South America Middle East & Africa By Type Single Crystal Silicon Polyc...
Summary Lead-Acid battery uses a chemical reaction to do work on charge and produce a voltage between their output terminals. Despite having a very low energy-to-weight ratio and a low energy-to-volume ratio, its ability to supply high surge currents means that the cells have a relatively large power-to-weight ratio. These features, along with their low cost, make it attractive for use in many fie...
Summary Flower Pots and Planters are the container which can be used for planting flowers small trees and other plants. Usually, planters are bigger than flower pots. There are a variety of materials for flower pots and planters, such as plastic, ceramics, wood, fiber glass, etc. Market Segment as follows: By Region Asia-Pacific North America Europe South America Middle East & ...
Summary Biomass molding fuel is made of agricultural and forestry residues such as rice stalk, straw, cotton stalk, bamboo sawdust, wood flour, ramie stalk, peanut husk, etc. It is produced by pellet machines or briquetteing machines, after going through several processing procedures, such as crushing, drying, mixing, molding or compressing, etc. And the final products are pellets and briquettes, ...
Summary High Temperature Energy Storage is a technology that stocks high temperature energy by heating or cooling a storage medium so that the stored energy can be used at a later time for heating and cooling applications and power generation Market Segment as follows: By Region Asia-Pacific North America Europe South America Middle East & Africa By Type Sodium-sulfur (NaS)...
Summary Waste Heat Recovery System is an economic method to increase the overall efficiency of the plant and, thus, to lower fuel demand. The largest sources of waste heat for most industries are exhaust and flue gases and heated air from heating systems such as high-temperature gases from burners in process heating; lower temperature gases from heat treating furnaces, dryers, and heaters; and hea...
Summary Market Segment as follows: By Region Asia-Pacific North America Europe South America Middle East & Africa By Type Biomass Briquette Biomass Pellet By Application Thermal Energy Power Generation By Company German Pellets Enviva Pinnacle Renewable Energy Group Pacific BioEnergy Corporation Vyborgskaya Cellulose Rentech Graanul I...
The global virtual power plant market was valued at $762 million in 2016, and is expected to reach at $4,587 million by 2023, registering a CAGR of 25.9% from 2017 to 2023. Virtual Power plant (VPP) comprises of a multitude of decentralized, grid-connec...
Compressed natural gas (CNG) is produced by compressing natural gas to less than one percent of the volume and is stored in cylinders at a pressure of 2025 MPa. CNG is used in internal combustion engine of automobiles modified for gasoline/diesel, which...
The global solar photovoltaic (PV) installations market size was valued at $131,818 million in 2016, and is anticipated to grow at a CAGR of 17.4% to reach $393,594 million during 2017 to 2023. Solar energy is an upcoming form of renewable energy with num...
Summary ICRWorld’s Waste to Energy (WTE) (Waste-to-Energy) market research report provides the newest industry data and industry future trends, allowing you to identify the products and end users driving Revenue growth and profitability. The industry report lists the leading competitors and provides the insights strategic industry Analysis of the key factors influencing the market. The report i...
Summary ICRWorld’s Flow Battery market research report provides the newest industry data and industry future trends, allowing you to identify the products and end users driving Revenue growth and profitability. The industry report lists the leading competitors and provides the insights strategic industry Analysis of the key factors influencing the market. The report includes the forecasts, Anal...
Summary ICRWorld’s PV (Photovoltaics) market research report provides the newest industry data and industry future trends, allowing you to identify the products and end users driving Revenue growth and profitability. The industry report lists the leading competitors and provides the insights strategic industry Analysis of the key factors influencing the market. The report includes the forecasts...
Summary ICRWorld’s Dye-sensitized Solar Cells (DSSC) market research report provides the newest industry data and industry future trends, allowing you to identify the products and end users driving Revenue growth and profitability. The industry report lists the leading competitors and provides the insights strategic industry Analysis of the key factors influencing the market. The report include...
Summary ICRWorld’s Biomassfired Heating Plant market research report provides the newest industry data and industry future trends, allowing you to identify the products and end users driving Revenue growth and profitability. The industry report lists the leading competitors and provides the insights strategic industry Analysis of the key factors influencing the market. The report includes the f...
Summary ICRWorld’s Microbial Enhanced Oil Recovery market research report provides the newest industry data and industry future trends, allowing you to identify the products and end users driving Revenue growth and profitability. The industry report lists the leading competitors and provides the insights strategic industry Analysis of the key factors influencing the market. The report includes ...