Request for Covid-19 Impact Assessment of this Report
Premix plaster is basically a dry mix plastering material which is mixed with water at job site. The ready-mix plaster requires low curing time compared to that of conventional plastering materials. Some of the majorly used premix plaster include cement, lime, and gypsum-based premix plaster that are applied either by hand or by spray machines. These are supplied in small and large bags, and in bulk quantity to construction sites. Premix plaster is widely used on walls, ceilings, and columns in residential, commercial, and industrial buildings and constructions.
The market is driven by increase in need for plastering materials in the construction sector. For instance, Saudi Arabia, being a member of Gulf Country Council (GCC) accounted for significant market share (more than one third) in Gulf Country Council (GCC) construction market. In addition, rise in population coupled with growing urbanization led to large number of new construction projects in residential and commercial sector, which will further influence the market growth. Furthermore, the government is actively spending in construction sector with the help of foreign investors to increase the contribution of construction sector from 8.4% to 10% in the GDP by 2030. Such developments will lead to new residential and commercial construction projects, which will positively impact the premix plaster market. However, the high cost and time constraint of premix plaster may negatively affect the market growth.
Premix plaster is not suitable for small-sized projects and it should be applied within 4 hours after the mixture is prepared. In addition, it requires effective transportation between construction site and batching plant to avoid slumps in the plaster mixture. Furthermore, the low value to weight ratio of premix plaster is a big problem for industry players, which restricts the transport of plaster materials over long distance. Transportation of premix plaster over long distance may be uneconomical and non-profitable, which leads to negotiation of price of premix plaster on local basis rather than on a global basis.
The Saudi Arabia premix plaster market is segmented on the basis of binding material and end user. On the basis of binding material, it is divided into cement, lime, gypsum, and others (gauged, aerated cement, and burnt bricks). The cement-based premix plaster accounted for significant market share, owing to large application in both exterior and interior plastering unlike gypsum and lime plasters. Due to high water retention, cement plaster can be used even in moist areas such as kitchen and washroom. Based on end user, it is categorized into residential, commercial, and industrial end user. The residential segment accounted for the highest revenue share, owing to increase in investment for social and sub urban development projects, which was aimed to provide housing opportunities for low-income groups.
Major players have adopted product launch and agreement to sustain the intense market competition. The key players profiled in the report include Saudi Readymix, Saudi vetonit co. Ltd., Unibeton Ready Mix, Saint-Gobain Weber Middle East, Conmix Ltd., and Don Construction Products ltd.
COVID-19 scenario analysis
• The Saudi Arabia premix plaster market had immediate impact of COVID-19 breakdown. The industry has been persistently challenged by huge number of labor shortage.
• In addition, contractors are expected to witness significant challenges, owing to operational uncertainties. Nation wise lockdown and social distancing norms negatively impacted transportation sector, which is vital for premix plaster service. Furthermore, restrictions on cross border import, disrupted the Saudi Arabia premix plaster supply chain.
• The delay in upstream and downstream activities led to increase in inventory carrying cost, which further impacted overall project cost.
• Moreover, discretionary spending on non-essential home items is pressurized for last six to eight months, which further restricted the demand for plastering services.
• However, implementation of IoT and automation may improve the market scenario reducing the need of labors wherever possible.
Key benefits for stakeholders
• The global Saudi Arabia premix plaster market analysis covers in-depth information of major industry participants.
• Porter’s five forces analysis helps analyze the potential of buyers & suppliers and the competitive scenario of the industry for strategy building.
• Major countries have been mapped according to their individual revenue contribution to the regional market.
• The report provides in-depth analysis of the global Saudi Arabia premix plaster market forecast for the period 2020–2027.
• The report outlines the current global Saudi Arabia premix plaster market trends and future estimations of the market from 2019 to 2027 to understand the prevailing opportunities and potential investment pockets.
• The key drivers, restraints, & market opportunity and their detailed impact analysis are explained in the study.
Key market segments
• By Binding Material
• Cement
• Lime
• Gypsum
• Others (Gauged, aerated cement, and burnt bricks)
• By End-User
• Residential
• Commercial
• Industrial
1.1.Report description
1.2.Key benefits for stakeholders
1.3.Key market segments
1.4.Research methodology
1.4.1.Primary research
1.4.2.Secondary research
1.4.3.Analyst tools and models
CHAPTER 2:EXECUTIVE SUMMARY
2.1.Key findings of the study
2.2.CXO perspective
CHAPTER 3:MARKET LANDSCAPE
3.1.Market definition and scope
3.2.Key findings
3.2.1.Top investment pockets
3.3.Porter's five forces analysis
3.4.Market share analysis & top player positioning, 2019
3.4.1.Top player positioning, 2019
3.5.Market dynamics
3.5.1.Drivers
3.5.1.1.Growth in urbanization
3.5.1.2.Robust investment in building and construction sector
3.5.2.Restraint
3.5.2.1.High initial investment
3.5.3.Opportunity
3.5.3.1.Advancement in ready mix plaster system
3.6.Pricing analysis
3.7.Value chain analysis
3.8.Criss-cross analysis of premix plaster binding materials, by end-use industry
3.9.Impact of key regulation
3.10.Impact of COVID-19 outburst on the Saudi Arabia premix plaster market
3.11.Market profitability
3.11.1.Industry Profitability and Growth
3.11.2.Recovering Construction Sector and Growth of Smart Cities
3.11.3.Bringing Digital Disruption
CHAPTER 4:SAUDI ARABIA PREMIX PLASTERS MARKET, BY BINDING MATERIAL
4.1.Overview
4.1.1.Market size and forecast
4.2.Cement
4.2.1.Key market trends, growth factors, and opportunities
4.2.2.Market size and forecast
4.3.Lime
4.3.1.Key market trends, growth factors, and opportunities
4.3.2.Market size and forecast
4.4.Gypsum
4.4.1.Key market trends, growth factors, and opportunities
4.4.2.Market size and forecast
4.5.Others
4.5.1.Key market trends, growth factors, and opportunities
4.5.2.Market size and forecast
CHAPTER 5:SAUDI ARABIA PREMIX PLASTERS MARKET, BY END USER
5.1.Overview
5.1.1.Market size and forecast
5.2.Residential
5.2.1.Key market trends, growth factors, and opportunities
5.2.2.Market size and forecast
5.3.Commercial
5.3.1.Key market trends, growth factors, and opportunities
5.3.2.Market size and forecast
5.4.Industrial
5.4.1.Key market trends, growth factors, and opportunities
5.4.2.Market size and forecast
CHAPTER 6:COMPETITIVE LANDSCAPE
6.1.Introduction
6.2.Product mapping of top 10 players
6.3.Competitive heatmap
CHAPTER 7:COMPANY PROFILES
7.1.CONMIX LTD.
7.1.1.Company overview
7.1.2.Company snapshot
7.1.3.Operating business segments
7.1.4.Product Portfolio
7.2.DON CONSTRUCTION PRODUCTS LTD.
7.2.1.Company overview
7.2.2.Company snapshot
7.2.3.Operating business segments
7.2.4.Product portfolio
7.3.FOSROC SAUDI ARABIA
7.3.1.Company overview
7.3.2.Company snapshot
7.3.3.Operating business segments
7.3.4.Product Portfolio
7.4.MASTOUR READYMIX
7.4.1.Company overview
7.4.2.Company snapshot
7.4.3.Operating business segments
7.4.4.Product portfolio
7.5.SAINT-GOBAIN WEBER MIDDLE EAST
7.5.1.Company overview
7.5.2.Company snapshot
7.5.3.Operating business segments
7.5.4.Product Portfolio
7.5.5.Business performance
7.6.SAUDI READYMIX
7.6.1.Company overview
7.6.2.Company Snapshot
7.6.3.Operating business segments
7.6.4.Product Portfolio
7.7.SAUDI VETONIT CO. LTD.
7.7.1.Company overview
7.7.2.Company snapshot
7.7.3.Operating business segments
7.7.4.Product portfolio
7.8.UNIBETON READY MIX
7.8.1.Company overview
7.8.2.Company snapshot
7.8.3.Operating business segments
7.8.4.Product portfolio
7.9.WACKER CHEMICALS AG
7.9.1.Company overview
7.9.2.Company snapshot
7.9.3.Operating business segments
7.9.4.Product portfolio
7.9.5.Business performance
7.10.WUENSCH PLASTER
7.10.1.Company overview
7.10.2.Company snapshot
7.10.3.Operating business segments
7.10.4.Product portfolio
TABLE 01.PRICING ANALYSIS OF SAUDI ARABIA PREMIX PLASTER MARKET, BY BINDING MATERIAL (USD/TON)
TABLE 02.PRICING ANALYSIS OF SAUDI ARABIA PREMIX PLASTER MARKET, BY TOP VARIENTS (USD/KG)
TABLE 03.PRICING ANALYSIS OF SAUDI ARABIA PREMIX PLASTER MARKET, BY SUPPLIER (USD/KG)
TABLE 04.SAUDI ARABIA PREMIX PLASTERS MARKET PROFITABILITY RATIOS
TABLE 05.SAUDI ARABIA PREMIX PLASTERS MARKET, BY BINDING MATERIAL, 2019–2027 (KILOTONS)
TABLE 06.SAUDI ARABIA PREMIX PLASTERS MARKET, BY BINDING MATERIAL, 2019–2027 ($MILLION)
TABLE 07.SAUDI ARABIA PREMIX PLASTERS MARKET, BY END USER, 2019–2027 (KILOTONS)
TABLE 08.SAUDI ARABIA PREMIX PLASTERS MARKET, BY END USER, 2019–2027 ($MILLION)
TABLE 09.CONMIX LTD.: COMPANY SNAPSHOT
TABLE 10.CONMIX LTD.: OPERATING SEGMENT
TABLE 11.CONMIX LTD.: PRODUCT PORTFOLIO
TABLE 12.DON CONSTRUCTION PRODUCTS: COMPANY SNAPSHOT
TABLE 13.DON CONSTRUCTION PRODUCTS: OPERATING SEGMENT
TABLE 14.DON CONSTRUCTION PRODUCTS: PRODUCT PORTFOLIO
TABLE 15.FOSROC SAUDI ARABIA: COMPANY SNAPSHOT
TABLE 16.FOSROC SAUDI ARABIA: OPERATING SEGMENTS
TABLE 17.FOSROC SAUDI ARABIA: PRODUCT PORTFOLIO
TABLE 18.MASTOUR READYMIX: COMPANY SNAPSHOT
TABLE 19.MASTOUR READYMIX: OPERATING SEGMENTS
TABLE 20.MASTOUR READYMIX: PRODUCT PORTFOLIO
TABLE 21.SAINT-GOBAIN WEBER MIDDLE EAST: COMPANY SNAPSHOT
TABLE 22.SAINT-GOBAIN WEBER MIDDLE EAST: OPERATING SEGMENTS
TABLE 23.SAINT-GOBAIN WEBER MIDDLE EAST: PRODUCT PORTFOLIO
TABLE 24.OVERALL FINANCIAL STATUS ($MILLION)
TABLE 25.SAUDI READYMIX: COMPANY SNAPSHOT
TABLE 26.SAUDI READYMIX: OPERATING SEGMENTS
TABLE 27.SAUDI READYMIX: PRODUCT PORTFOLIO
TABLE 28.SAUDI VETONIT CO. LTD.: COMPANY SNAPSHOT
TABLE 29.SAUDI VETONIT CO. LTD.: OPERATING SEGMENT
TABLE 30.SAUDI VETONIT CO. LTD.: PRODUCT PORTFOLIO
TABLE 31.UNIBETON READY MIX: COMPANY SNAPSHOT
TABLE 32.UNIBETON READY MIX: OPERATING SEGMENTS
TABLE 33.UNIBETON READY MIX: PRODUCT PORTFOLIO
TABLE 34.WACKER CHEMIE AG: COMPANY SNAPSHOT
TABLE 35.WACKER CHEMIE AG: OPERATING SEGMENTS
TABLE 36.WACKER CHEMIE AG: PRODUCT PORTFOLIO
TABLE 37.OVERALL FINANCIAL STATUS ($MILLION)
TABLE 38.WUENSCHPLASTER: COMPANY SNAPSHOT
TABLE 39.WUENSCHPLASTER: OPERATING SEGMENTS
TABLE 40.WUENSCHPLASTER: PRODUCT PORTFOLIO
Photonic Crystals are attractive optical materials for controlling and manipulating the flow of light. The global market for components and modules using Photonic Crystals indicates a CAGR of 33.1% and is estimated to reach $20.4 billion in 2017.
Nanomaterials possess nanoscale dimensions ranging from 1 to 100 nanometers. They occur naturally or can be engineered with specific properties such as size, shape, surface, and chemistry. Volcanic ash and forest fibers are some of the examples of natural nano...
Global molded plastics market was valued at $529,845 million in 2016, and is expected to garner $690,158 million by 2023, registering a CAGR of 3.9% from 2017 to 2023. Molded plastics are synthetically produced non-metallic compounds, which can be molded ...