Request for Covid-19 Impact Assessment of this Report
Sheet molding compound (SMC) is both a process and reinforced composite material. The composite is a “ready to mold” glass or carbon fiber reinforced polyester material primarily used in compression molding. The SMC sheets are manufactured by dispersing long strands of chopped glass fibers or carbon fibers on a bath of polyester resin, vinylester resin or epoxy resin.SMC materials are thermosets and contain glass or carbon reinforcement levels between 10 and 60 %. The longer fibers in SMC result in better strength properties than standard bulk molding compound (BMC) products. Typical applications include demanding electrical applications, corrosion resistant needs, structural components at low cost, automotive, and transit. SMC delivers high surface quality. SMC is used for larger parts where higher mechanical strength is needed.
The global Sheet Molding Compound (SMC) market will reach xxx Million USD in 2019 with CAGR xx% 2019-2024. The objective of report is to define, segment, and project the market on the basis of product type, application, and region, and to describe the content about the factors influencing market dynamics, policy, economic, technology and market entry etc.
Based on products type, the report describes major products type share of regional market. Products mentioned as follows:
General Purpose SMC
Flame Resistance SMC
Electronic Insulators SMC
Corrosion Resistance SMC
Others
Leading vendors in the market are included based on profile, business performance etc. Vendors mentioned as follows:
IDI Composites International
Magna
Menzolit
Continental Structural Plastics
Premix
Polynt
Molymer SSP
ASTAR
Core Molding Technologies
Lorenz
MCR
Huamei New Material
Yueqing SMC & BMC
Tianma Group
Jiangshi Composite
Huayuan Group
BI-GOLD New Material
Changzhou Rixin
DIC
East China Sea composite materials
Fangda Thermoset Plastic
SIDA composites
Fu Runda Group
Devi Polymers
Based on Application, the report describes major application share of regional market. Application mentioned as follows:
Automotive and Commercial Vehicle
Electrical & Energy
Construction
Others
Based on region, the report describes major regions market by products and application. Regions mentioned as follows:
Asia-Pacific
North America
Europe
South America
Middle East & Africa
1 Market Overview
1.1 Objectives of Research
1.1.1 Definition
1.1.2 Specifications
1.2 Market Segment
1.2.1 by Type
1.2.1.1 General Purpose SMC
1.2.1.2 Flame Resistance SMC
1.2.1.3 Electronic Insulators SMC
1.2.1.4 Corrosion Resistance SMC
1.2.1.5 Others
1.2.2 by Application
1.2.2.1 Automotive and Commercial Vehicle
1.2.2.2 Electrical & Energy
1.2.2.3 Construction
1.2.2.4 Others
1.2.3 by Regions
2 Industry Chain
2.1 Industry Chain Structure
2.2 Upstream
2.3 Market
2.3.1 SWOT
2.3.2 Dynamics
3 Environmental Analysis
3.1 Policy
3.2 Economic
3.3 Technology
3.4 Market Entry
4 Market Segmentation by Type
4.1 Market Size
4.1.1 General Purpose SMC Market, 2013-2018
4.1.2 Flame Resistance SMC Market, 2013-2018
4.1.3 Electronic Insulators SMC Market, 2013-2018
4.1.4 Corrosion Resistance SMC Market, 2013-2018
4.1.5 Others Market, 2013-2018
4.2 Market Forecast
4.2.1 General Purpose SMC Market Forecast, 2019-2024
4.2.2 Flame Resistance SMC Market Forecast, 2019-2024
4.2.3 Electronic Insulators SMC Market Forecast, 2019-2024
4.2.4 Corrosion Resistance SMC Market Forecast, 2019-2024
4.2.5 Others Market Forecast, 2019-2024
5 Market Segmentation by Application
5.1 Market Size
5.1.1 Automotive and Commercial Vehicle Market, 2013-2018
5.1.2 Electrical & Energy Market, 2013-2018
5.1.3 Construction Market, 2013-2018
5.1.4 Others Market, 2013-2018
5.2 Market Forecast
5.2.1 Automotive and Commercial Vehicle Market Forecast, 2019-2024
5.2.2 Electrical & Energy Market Forecast, 2019-2024
5.2.3 Construction Market Forecast, 2019-2024
5.2.4 Others Market Forecast, 2019-2024
6 Market Segmentation by Region
6.1 Market Size
6.1.1 Asia-Pacific
6.1.1.1 Asia-Pacific Market, 2012-2018
6.1.1.2 Asia-Pacific Market by Type
6.1.1.3 Asia-Pacific Market by Application
6.1.2 North America
6.1.2.1 North America Market, 2012-2018
6.1.2.2 North America Market by Type
6.1.2.3 North America Market by Application
6.1.3 Europe
6.1.3.1 Europe Market, 2012-2018
6.1.3.2 Europe Market by Type
6.1.3.3 Europe Market by Application
6.1.4 South America
6.1.4.1 South America Market, 2012-2018
6.1.4.2 South America Market by Type
6.1.4.3 South America Market by Application
6.1.5 Middle East & Africa
6.1.5.1 Middle East & Africa Market, 2012-2018
6.1.5.2 Middle East & Africa Market by Type
6.1.5.3 Middle East & Africa Market by Application
6.2 Market Forecast
6.2.1 Asia-Pacific Market Forecast, 2019-2024
6.2.2 North America Market Forecast, 2019-2024
6.2.3 Europe Market Forecast, 2019-2024
6.2.4 South America Market Forecast, 2019-2024
6.2.5 Middle East & Africa Market Forecast, 2019-2024
7 Market Competitive
7.1 Global Market by Vendors
7.2 Market Concentration
7.3 Price & Factors
7.4 Marketing Channel
8 Major Vendors
8.1 IDI Composites International
8.2 Magna
8.3 Menzolit
8.4 Continental Structural Plastics
8.5 Premix
8.6 Polynt
8.7 Molymer SSP
8.8 ASTAR
8.9 Core Molding Technologies
8.10 Lorenz
8.11 MCR
8.12 Huamei New Material
8.13 Yueqing SMC & BMC
8.14 Tianma Group
8.15 Jiangshi Composite
8.16 Huayuan Group
8.17 BI-GOLD New Material
8.18 Changzhou Rixin
8.19 DIC
8.20 East China Sea composite materials
8.21 Fangda Thermoset Plastic
8.22 SIDA composites
8.23 Fu Runda Group
8.24 Devi Polymers
9 Conclusion
Photonic Crystals are attractive optical materials for controlling and manipulating the flow of light. The global market for components and modules using Photonic Crystals indicates a CAGR of 33.1% and is estimated to reach $20.4 billion in 2017.
Nanomaterials possess nanoscale dimensions ranging from 1 to 100 nanometers. They occur naturally or can be engineered with specific properties such as size, shape, surface, and chemistry. Volcanic ash and forest fibers are some of the examples of natural nano...
Global molded plastics market was valued at $529,845 million in 2016, and is expected to garner $690,158 million by 2023, registering a CAGR of 3.9% from 2017 to 2023. Molded plastics are synthetically produced non-metallic compounds, which can be molded ...