Intrinsic safety (IS) is a protection technique for safe operation of electrical equipment in hazardous areas by limiting the energy, electrical and thermal, available for ignition. In signal and control circuits that can operate with low currents and voltages, the intrinsic safety approach simplifies circuits and reduces installation cost over other protection methods. Areas with dangerous concen...

Hydropower is the most mature, reliable and cost-effective renewable power generation technology where power is derived from the energy of water moving from higher to lower elevations. It is a proven, anticipated, and typically price-competitive technology. Hydropower has one of the best efficiencies of conversion of all known energy sources (water to wire 90 percent efficiency).  Scope of the...

A hybrid street lighting system is a standalone outdoor lighting system used to illuminate an open area or a street. The hybrid street lights are powered by solar and wind energy. The hybrid street lighting system typically consists of a compact fluorescent lamp (CFL) or light-emitting diode (LED) fixed inside as a luminaire, which is mounted on a pole. Scope of the Report: This report focuses...

The hybrid power system is defined as the energy system which is designed or fabricated to extract power by using two or more energy sources. It is the combination of more than one energy sources for giving to the load. The hybrid power system has less emission, good reliability, efficiency, and lower cost. Some of the hybrid power systems use solar and wind power to generate power. Wind and solar...

Power is generated, transmitted and distributed as AC, and most of the time, power is also consumed as AC. However, when transmitting power over long distances such as from an offshore wind farm, an AC line would be uneconomical due to the high power losses that such transmission involves. In such situations, DC power is used, and the conversion of AC power to DC for transmission is achieved using...

Biomass used for power generation can provide a low-carbon and sustainable alternative to fossil fuels while allowing local communities to use domestic biomass resources. It makes productive utilization of wood manufacturing wastes, the unused portion of urban waste and crop residues. Scope of the Report: This report focuses on the Biomass Power in global market, especially in North America, E...

A biogas generator is a reactor or chemical processing system designed to organically break down biological source materials into gasses such as methane and hydrogen that can then be combined with oxygen for use as a source of fuel. Many types of waste matter can be used to generate biogas, including municipal waste and manure, plant waste from crop fields, residential lawns, parks, and more. Simp...

Nuclear power is a significant remedy to curb carbon emission. It helps reduce carbon emissions of over two billion tons each year. Increased deployment of nuclear power would help China meet its climate change objectives. Scope of the Report: This report focuses on the Nuclear Power in global market, especially in North America, Europe and Asia-Pacific, South America, Middle East and Africa. ...

Nuclear fuel is a substance that is used in nuclear power stations to produce heat to power turbines. Heat is created when nuclear fuel undergoes nuclear fission. Most nuclear fuels contain heavy fissile elements that are capable of nuclear fission, such as Uranium-235 or Plutonium-239. When the unstable nuclei of these atoms are hit by a slow-moving neutron, they split, creating two daughter nucl...

The power rental is defined by renting a temporary power plant or generators. Power is generated by burning fossil fuels such coal, oil, and gas to generate steam that drives large turbines to produce electricity. Power rental is defined as plant hire providing flexibility, reliability, speed, and cost-effectiveness. Moreover, power on rent delivers complete operating power packages and delivers s...

Marine vessel energy efficiency refers to the solutions that enhance operational efficiency through sustainable energy usage. The growing consumption of fossil gases and emission of greenhouse gases (GHG) has created serious tensions in the marine industry. Thus, to reduce harmful gas emissions from marine vessels, International Maritime Organization (IMO) has made it compulsory to implement Energ...

Growing number of vessels and the increasing expenditure on submarines and ships by military and navy across emerging economies, are forcing companies to develop marine power supply devices to continue the profitability of the market. Scope of the Report: This report focuses on the Marine Power Systems in global market, especially in North America, Europe and Asia-Pacific, South America, Middl...

Manganese is widely used in steel production for desulfuration and deoxidization. It enhances tensile strength, wear resistance, weldability, and hardness of steel. Scope of the Report: This report focuses on the Manganese Mining in global market, especially in North America, Europe and Asia-Pacific, South America, Middle East and Africa. This report categorizes the market based on manufacture...

Offshore wind power, also known as offshore wind energy, is linked to the construction of offshore wind power plants, usually located on the continental shelf, using wind power. Scope of the Report: This report focuses on the Offshore Wind in global market, especially in North America, Europe and Asia-Pacific, South America, Middle East and Africa. This report categorizes the market based on m...

Residential energy management solutions are cost effective and latest technology solutions designed to cater to the demand of reduction in energy consumption by residential customers. Residential energy management solutions consume less power and results in lower utility bills. Residential energy management solutions measure the energy consumption of home’s heating, cooling, lighting systems and...

Batteries are considered amongst the most remarkable man-made inventions in history and have been the focus of intense investigation by both scientists and engineers across the globe. Evolving from the primitive Voltaic Pile (the first electrical battery created in 1799), which used zinc and copper electrodes and brine-soaked paper as an electrolyte, a wide range of batteries are now available in ...

Microwave transmission is the transmission of information or energy by microwave radio waves. Although an experimental 40-mile (64 km) microwave telecommunication link across the English Channel was demonstrated in 1931, the development of radar in World War II provided the technology for practical exploitation of microwave communication. In the 1950s, large transcontinental microwave relay networ...

Lithium-ion Battery for Vehicles is a power battery for hybrid vehicles and electric vehicles. Since some technical properties of nickel-metal hydride batteries, such as energy density and charge-discharge rate, have approached theoretical limit values, lithium batteries have high energy density and large capacity. No memory and other advantages. Scope of the Report: This report focuses on the...

Solid-State Lighting (SSL) products such as LED, OLED, and CFL consumes very less energy and makes less dissipation of heat compared to traditional lighting systems such as incandescent offering increased illumination for a range of lighting applications. SSL are suitable for low-space applications such as automotive lighting. Scope of the Report: This report focuses on the SSL and Fluorescent...

A genset (generator set) is used to power the reefer container when normal shore power is not available. E.g. when trucking over long distances or when chilled or sensitive cargo is being moved. The majority of the gensets are clipped on to the upper front of the reefer container (clip-on genset). Another type of genset can be attached to the standard chassis frame (underslung genset). Scope of...

Hydro-pumped Storage is an altered use of conventional hydropower technology to store and manage energy. Hydro pumped storage projects store electricity by circulating water between an upper and lower reservoir. The electric energy is converted to potential energy and stored in the form of water at an upper elevation. Pumping the water uphill for temporary storage recharges the battery and during ...

An uninterruptible power supply is electrical equipment that gives emergency power to a load when the input power source or mains power fails. An uninterruptible power supply is different from an auxiliary or emergency power system or standby generator in that it will give near-instantaneous safety from input power interruptions, by supplying energy stored in batteries, super capacitors, or flywhe...

Wind power generation utilizes the strength of wind to generate power by spinning turbines. Since wind power is considered clean energy that does not emit CO2, its role is critically important in preserving the future of the environment. Scope of the Report: This report focuses on the Wind Power Generation Systems in global market, especially in North America, Europe and Asia-Pacific, South Am...

Syngas is a fuel gas fusion that consists of hydrogen and carbon dioxide. It is an adaptable intermediate used for manufacture of methanol, ammonia, and SNG. The compositions of materials within syngas vary depending leading to the chemical composition of the feedstock. Syngas is formed from several hydrocarbon feedstocks, via reaction among both steam and oxygen. Scope of the Report: This rep...

Superconducting Magnetic Energy Storage (SMES) systems store energy in the magnetic field created by the flow of direct current in a superconducting coil which has been cryogenically cooled to a temperature below its superconducting critical temperature. Scope of the Report: This report focuses on the Superconducting Magnetic Energy Storage (SMES) in global market, especially in No...

A street light, light pole, lamppost, street lamp, light standard, or lamp standard is a raised source of light on the edge of a road or path. When urban electric power distribution became ubiquitous in developed countries in the 20th century, lights for urban streets followed, or sometimes led. Many lamps have light-sensitive photocells that activate automatically when light is or is not needed: ...

Lead-acid batteries are rechargeable batteries that contain lead electrodes with diluted sulfuric acid, which acts as an electrolyte. Lead-acid batteries used for stationary applications are known as SLA batteries. Each cell in a typical lead-acid battery generates around 2 volts of power. Though SLA batteries have significantly low energy-to-weight and energy-to-volume ratios, they have the abili...

Generators are devices that convert mechanical energy into electric energy. The source of mechanical energy can vary from internal combustion engine, hand crank, compressed air, and reciprocating steam engine. Internal combustion engines use diesel, gasoline, propane gas, and natural gas to produce mechanical energy, and this mechanical energy is converted into electric energy with the help of gen...

Generators are backup devices designed to provide temporary AC or DC power using the supplied fuel (gasoline, diesel, or gas). They can be used as a source of backup or emergency power for residential, commercial, and industrial applications. A typical generator is powered by a fuel engine. Portable generators are the best solutions to provide AC power for standby, non-hardwired applications. Low-...

A combination of diesel engine and an electric generator used to generate electricity is termed as a diesel generator. The diesel generator has an integrated internal diesel combustion engine that ignites diesel fuel and the energy produced is converted into mechanical energy to generate electricity. Diesel generators are available in various power ratings, sizes, and have wide-scale operation acr...