2018-2023 Global and Regional Heat Recovery Steam Generator Industry Production, Sales and Consumption Status and Prospects Professional Market Research Report
- HNY2587080
- 147 Pages
- May 2018
- Energy and Power
Increasing global electricity demand, subsequent investments in power plants, increasing efforts to reduce global greenhouse gas emissions, and growing adoption of CCPP & CHP are the factors driving the heat recovery steam generator market.Applications of heat recovery steam generators are not limited to use in CCPP and CHP plants alone. They are also used in biomass and integrated solar combined cycle (ISCC) power plants.The report segments the heat recovery steam generator market on the basis of its application in various end-user industries, which include utilities, chemicals, refineries, pulp & paper, commercial, and other industries. Based on its rated power, the heat recovery steam generator market has been categorized in the following MW ranges, namely, up to 30 MW and >30 MW. The market has also been categorized on the basis of application into combined cycle and CHP.
By Market Players:
General Electric Company , Siemens AG , AMEC Foster Wheeler PLC , Babcock & Wilcox Company , Doosan Engineering & Construction Co., Ltd. , Thermax Limited , Cleaver Brooks , CMI Group , Greens Power Limited , Kelvion Holding Gmbh , Nooter/Eriksen, Inc., , , , , , , , ,
By Rated Power
Up To 30 MW, >30 MW, , ,
By Application
Combined Cycle, CHP, , ,
By End-User
Utilities, Chemicals, Refineries, Pulp & Paper, Commercial & Others
By
, , , ,
The prime objective of this report is to help the user understand the market in terms of its definition, segmentation, market potential, influential trends, and the challenges that the market is facing. Deep researches and analysis were done during the preparation of the report. The readers will find this report very helpful in understanding the market in depth. The data and the information regarding the market are taken from reliable sources such as websites, annual reports of the companies, journals, and others and were checked and validated by the industry experts. The facts and data are represented in the report using diagrams, graphs, pie charts, and other pictorial representations. This enhances the visual representation and also helps in understanding the facts much better.
Points Covered in The Report:
The points that are discussed within the report are the major market players that are involved in the market such as manufacturers, raw material suppliers, equipment suppliers, end users, traders, distributors and etc.
The complete profile of the companies is mentioned. And the capacity, production, price, revenue, cost, gross, gross margin, sales volume, sales revenue, consumption, growth rate, import, export, supply, future strategies, and the technological developments that they are making are also included within the report. The historical data from 2012 to 2017 and forecast data from 2018 to 2023.
The growth factors of the market is discussed in detail wherein the different end users of the market are explained in detail.
Data and information by manufacturer, by region, by type, by application and etc, and custom research can be added according to specific requirements.
The report contains the SWOT analysis of the market. Finally, the report contains the conclusion part where the opinions of the industrial experts are included.
Key Reasons to Purchase
To gain insightful analyses of the market and have comprehensive understanding of the global market and its commercial landscape.
Assess the production processes, major issues, and solutions to mitigate the development risk.
To understand the most affecting driving and restraining forces in the market and its impact in the global market.
Learn about the market strategies that are being adopted by leading respective organizations.
To understand the future outlook and prospects for the market.
Besides the standard structure reports, we also provide custom research according to specific requirements.
1.1 Definition
1.2 Brief Introduction by Major Rated Power
1.2.1 Up To 30 MW
1.2.2 >30 MW
1.2.3
1.2.4
1.2.5
1.3 Brief Introduction by Major Application
1.3.1 Combined Cycle
1.3.2 CHP
1.3.3
1.3.4
1.3.5
1.4 Brief Introduction by Major Regions
1.4.1 United States
1.4.2 Europe
1.4.3 China
1.4.4 Japan
1.4.5 India
1.5 Brief Introduction by Major End-User
1.5.1 Utilities
1.5.2 Chemicals
1.5.3 Refineries
1.5.4 Pulp & Paper
1.5.5 Commercial & Others
1.6 Brief Introduction by Major
1.6.1
1.6.2
1.6.3
1.6.4
1.6.5
1.7 Brief Introduction by Major
1.7.1
1.7.2
1.7.3
1.7.4
1.7.5
1.8 Brief Introduction by Major
1.8.1
1.8.2
1.8.3
1.8.4
1.8.5
Chapter 2 Production Market Analysis
2.1 Global Production Market Analysis
2.1.1 2012-2017 Global Capacity, Production, Capacity Utilization Rate, Ex-Factory Price, Revenue, Cost, Gross and Gross Margin Analysis
2.1.2 2012-2017 Major Manufacturers Performance and Market Share
2.2 Regional Production Market Analysis
2.2.1 2012-2017 Regional Market Performance and Market Share
2.2.2 United States Market
2.2.3 Europe Market
2.2.4 China Market
2.2.5 Japan Market
2.2.6 India Market
2.2.7 Market
Chapter 3 Sales Market Analysis
3.1 Global Sales Market Analysis
3.1.1 2012-2017 Global Sales Volume, Sales Price and Sales Revenue Analysis
3.1.2 2012-2017 Major Manufacturers Performance and Market Share
3.2 Regional Sales Market Analysis
3.2.1 2012-2017 Regional Market Performance and Market Share
3.2.2 United States Market
3.2.3 Europe Market
3.2.4 China Market
3.2.5 Japan Market
3.2.6 India Market
3.2.7 Market
Chapter 4 Consumption Market Analysis
4.1 Global Consumption Market Analysis
4.1.1 2012-2017 Global Consumption Volume Analysis
4.2 Regional Consumption Market Analysis
4.2.1 2012-2017 Regional Market Performance and Market Share
4.2.2 United States Market
4.2.3 Europe Market
4.2.4 China Market
4.2.5 Japan Market
4.2.6 India Market
4.2.7 Market
Chapter 5 Production, Sales and Consumption Market Comparison Analysis
5.1 Global Production, Sales and Consumption Market Comparison Analysis
5.2 Regional Production, Sales Volume and Consumption Volume Market Comparison Analysis
5.2.1 United States
5.2.2 Europe
5.2.3 China
5.2.4 Japan
5.2.5 India
5.2.6
Chapter 6 Major Manufacturers Production and Sales Market Comparison Analysis
6.1 Global Major Manufacturers Production and Sales Market Comparison Analysis
6.1.1 2012-2017 Global Major Manufacturers Production and Sales Market Comparison
6.2 Regional Major Manufacturers Production and Sales Market Comparison Analysis
6.2.1 United States
6.2.2 Europe
6.2.3 China
6.2.4 Japan
6.2.5 India
6.2.6
Chapter 7 Major Rated Power Analysis
7.1 2012-2017 Major Rated Power Market Share
7.2 Up To 30 MW
7.3 >30 MW
7.4
7.5
7.6
Chapter 8 Major Application Analysis
8.1 2012-2017 Major Application Market Share
8.2 Combined Cycle
8.2.1 2012-2017 Sales Analysis
8.3 CHP
8.3.1 2012-2017 Sales Analysis
8.4
8.4.1 2012-2017 Sales Analysis
8.5
8.5.1 2012-2017 Sales Analysis
8.6
8.6.1 2012-2017 Sales Analysis
Chapter 9 Industry Chain Analysis
9.1 Up Stream Industries Analysis
9.1.1 Raw Material and Suppliers
9.1.2 Equipment and Suppliers
9.2 Manufacturing Analysis
9.2.1 Manufacturing Process
9.2.2 Manufacturing Cost Structure
9.2.3 Manufacturing Plants Distribution Analysis
9.3 Industry Chain Structure Analysis
Chapter 10 Global and Regional Market Forecast
10.1 Production Market Forecast
10.1.1 Global Market Forecast
10.1.2 Major Region Forecast
10.2 Sales Market Forecast
10.2.1 Global Market Forecast
10.2.2 Major Classification Forecast
10.3 Consumption Market Forecast
10.3.1 Global Market Forecast
10.3.2 Major Region Forecast
10.3.3 Major Application Forecast
Chapter 11 Major Manufacturers Analysis
11.1 General Electric Company
11.1.1 Company Introduction
11.1.2 Product Specification and Major Types Analysis
11.1.3 2012-2017 Production Market Performance
11.1.4 2012-2017 Sales Market Performance
11.1.5 Contact Information
11.2 Siemens AG
11.2.1 Company Introduction
11.2.2 Product Specification and Major Types Analysis
11.2.3 2012-2017 Production Market Performance
11.2.4 2012-2017 Sales Market Performance
11.2.5 Contact Information
11.3 AMEC Foster Wheeler PLC
11.3.1 Company Introduction
11.3.2 Product Specification and Major Types Analysis
11.3.3 2012-2017 Production Market Performance
11.3.4 2012-2017 Sales Market Performance
11.3.5 Contact Information
11.4 Babcock & Wilcox Company
11.4.1 Company Introduction
11.4.2 Product Specification and Major Types Analysis
11.4.3 2012-2017 Production Market Performance
11.4.4 2012-2017 Sales Market Performance
11.4.5 Contact Information
11.5 Doosan Engineering & Construction Co., Ltd.
11.5.1 Company Introduction
11.5.2 Product Specification and Major Types Analysis
11.5.3 2012-2017 Production Market Performance
11.5.4 2012-2017 Sales Market Performance
11.5.5 Contact Information
11.6 Thermax Limited
11.6.1 Company Introduction
11.6.2 Product Specification and Major Types Analysis
11.6.3 2012-2017 Production Market Performance
11.6.4 2012-2017 Sales Market Performance
11.6.5 Contact Information
11.7 Cleaver Brooks
11.7.1 Company Introduction
11.7.2 Product Specification and Major Types Analysis
11.7.3 2012-2017 Production Market Performance
11.7.4 2012-2017 Sales Market Performance
11.7.5 Contact Information
11.8 CMI Group
11.8.1 Company Introduction
11.8.2 Product Specification and Major Types Analysis
11.8.3 2012-2017 Production Market Performance
11.8.4 2012-2017 Sales Market Performance
11.8.5 Contact Information
11.9 Greens Power Limited
11.9.1 Company Introduction
11.9.2 Product Specification and Major Types Analysis
11.9.3 2012-2017 Production Market Performance
11.9.4 2012-2017 Sales Market Performance
11.9.5 Contact Information
11.10 Kelvion Holding Gmbh
11.10.1 Company Introduction
11.10.2 Product Specification and Major Types Analysis
11.10.3 2012-2017 Production Market Performance
11.10.4 2012-2017 Sales Market Performance
11.10.5 Contact Information
11.11 Nooter/Eriksen, Inc.
11.11.1 Company Introduction
11.11.2 Product Specification and Major Types Analysis
11.11.3 2012-2017 Production Market Performance
11.11.4 2012-2017 Sales Market Performance
11.11.5 Contact Information
11.12
11.12.1 Company Introduction
11.12.2 Product Specification and Major Types Analysis
11.12.3 2012-2017 Production Market Performance
11.12.4 2012-2017 Sales Market Performance
11.12.5 Contact Information
11.13
11.13.1 Company Introduction
11.13.2 Product Specification and Major Types Analysis
11.13.3 2012-2017 Production Market Performance
11.13.4 2012-2017 Sales Market Performance
11.13.5 Contact Information
11.14
11.14.1 Company Introduction
11.14.2 Product Specification and Major Types Analysis
11.14.3 2012-2017 Production Market Performance
11.14.4 2012-2017 Sales Market Performance
11.14.5 Contact Information
11.15
11.15.1 Company Introduction
11.15.2 Product Specification and Major Types Analysis
11.15.3 2012-2017 Production Market Performance
11.15.4 2012-2017 Sales Market Performance
11.15.5 Contact Information
11.16
11.16.1 Company Introduction
11.16.2 Product Specification and Major Types Analysis
11.16.3 2012-2017 Production Market Performance
11.16.4 2012-2017 Sales Market Performance
11.16.5 Contact Information
11.17
11.17.1 Company Introduction
11.17.2 Product Specification and Major Types Analysis
11.17.3 2012-2017 Production Market Performance
11.17.4 2012-2017 Sales Market Performance
11.17.5 Contact Information
11.18
11.18.1 Company Introduction
11.18.2 Product Specification and Major Types Analysis
11.18.3 2012-2017 Production Market Performance
11.18.4 2012-2017 Sales Market Performance
11.18.5 Contact Information
11.19
11.19.1 Company Introduction
11.19.2 Product Specification and Major Types Analysis
11.19.3 2012-2017 Production Market Performance
11.19.4 2012-2017 Sales Market Performance
11.19.5 Contact Information
11.20
11.20.1 Company Introduction
11.20.2 Product Specification and Major Types Analysis
11.20.3 2012-2017 Production Market Performance
11.20.4 2012-2017 Sales Market Performance
11.20.5 Contact Information
Chapter 12 New Project Investment Feasibility Analysis
12.1 New Project SWOT Analysis
12.2 New Project Investment Feasibility Analysis
Chapter 13 Conclusions
Chapter 14 Appendix
Author List
Disclosure Section
Research Methodology
Data Source
Interview List
Global Disclaimer
Similar Reports
Summary Based on products type, the report describes major products type share of regional market. Products mentioned as follows: By Type ?1 KW 1 KW-5 KW Based on region, the report describes major regions market by vendor, products and Application. Regions mentioned as follows: Europe North America China Japan & Korea India Based on Application, the report describes major Application shar...
- Publish Date: April 1, 2017
- $800
The turbine generator market is expected to witness strong growth with government taking favourable initiatives to support the power sector. The report provides a brief overview of the turbine generator market in India, the market size and growth in value and volume terms has been provided. It also includes the market segmentation. An analysis of the drivers reveals that rise in overall power ...
- Publish Date: January 18, 2011
- $950
The natural gas market in India is witnessing growth and capacity expansions to meet the growing demand for gas consumption as a result of growth in industrial, auto and commercial sector. Increased economic activity is providing the players an opportunity for growth and expansion. The report provides a brief introduction to the natural gas industry. The market overview includes information rega...
- Publish Date: July 19, 2011
- $950
